Ringlock Scaffolding Vertical

Home/Ringlock Scaffolding System/Ringlock Scaffolding Vertical

Ringlock Scaffolding Vertical

1. A round rossette is welded each 0.5m.

2. Top can be connected by inner joint or welded outter pipe.

3. Made of high tensile structural steel with Hot dip galvanized finishing.

4.OEM is served.

Inquiry Now

 

SKU: DA-R1001A Category:

Description

The Ringlock scaffolding Vertical is the key connection point for all other components of the ringlock scaffolding system, also is the most important part of the Ringlock scaffolding.

Supported on the Base Jack or ground and the top end is connected to the upper Vertical by the inner joint, all linked with one another. It can be set up to the required height according to engineering requirements.

Therefore, the Vertical’s material requires high hardness to guarantee the safety usually uses Q345 steel.

Feature

  • Material:Q345 carbon steel tube
  • Tube Size:48.3X3.25mm.
  • Length: 0.5m,1.0m, 1.5m, 2.0m, 2.5m, 3.0m, 3.5m, 4.0m
  • Surface Treatment: Hot-dip Galvanized or Electro-glacanized.